ProFlame 584 Upgrade Kit

 

If you have either of the following Remote or Receiver they have been replaced by a new style Remote-Receiver System.

 

Remote: 111442-02                                                                                                          Receiver: 111441-02

FRC # 0.584.004                                                                                                                FRC # 0.584.211

                                                                                    

You will need to Order the New Remote System, you must order all 3 items for the new system to connect proerly.

The New Remote System works with 4 prong plug wires only: wire colors are brown/yellow/orange/black. Be sure to check the wiring connections from the stepper motor to the receiver, the stepper motor should plug directly into the receiver with a 4 pin plug.
If your stepper motor uses a Red plug with Gray ribbon wire see Note below.

 

 

"STOP"

 

NOTE:

If your Stepper Motor uses this style plug, you will need to replace the stepper motor for the proper connection to the new wiring harness.

 

 

 

Click Here for a Printable Version